"Motion-induced error compensation for phase shifting profilometry," Opt. Express (2018)

[114] Z. Liu, P. Zibley and S. Zhang, "Motion-induced error compensation for phase shifting profilometry," Opt. Express, 26(10), 12632-12637 (2018); doi:10.1364/OE.26.012632

Abstract

This paper proposes a novel method to substantially reduce motion-introduced phase error in phase-shifting profilometry. We first estimate the motion of an object from the difference between two subsequent 3D frames. After that, by leveraging the projector’s pinhole model, we can determine the motion-induced phase shift error from the estimated motion. A generic phase-shifting algorithm considering phase shift error is then utilized to compute the phase. Experiments demonstrated that proposed algorithm effectively improved the measurement quality by compensating for the phase shift error introduced by rigid and nonrigid motion for a standard single-projector and single-camera digital fringe projection system.

"Evaluation of pixel-wise geometric constraints based phase unwrapping method for low signal-to-noise-ratio (SNR) phase," Advanced Optical Technologies, (2016)

[91] Y. An, Z. Liu and S. Zhang, "Evaluation of pixel-wise geometric constraints based phase unwrapping method for low signal-to-noise-ratio (SNR) phase," Advanced Optical Technologies, 5(5-6), 423–432, (2016); doi: 10.1515/aot-2016-0048

This paper evaluates the robustness of our recently proposed geometric constraints based phase unwrapping method to unwrap low signal-to-noise ratio (SNR) phase.  Instead of capturing additional images for absolute phase unwrapping, the new phase unwrapping algorithm uses geometric constraints of the digital fringe projection (DFP) system to create a virtual reference phase map to unwrap the phase pixel by pixel. Both simulation and experimental results demonstrate that this new phase unwrapping method can even successfully unwrap low SNR phase maps that brings difficulties for conventional multi-frequency phase unwrapping methods.

Motion induced error reduction by combining Fourier transform profilometry with phase-shifting profilometry, Opt. Express, (2016)

[88] B. Li, Z. Liu and S. Zhang, "Motion induced error reduction by combining Fourier transform profilometry with phase-shifting profilometry," Opt. Express 24(20), 23289-23303 2016; doi: 10.1364/OE.24.023289

We propose a hybrid computational framework to reduce motion induced measurement error by combining the Fourier transform profilometry (FTP) and phase-shifting profilometry (PSP). The proposed method is composed of three major steps: Step 1 is to extract continuous relative phase maps for each isolated object with single-shot FTP method and spatial phase unwrapping; Step 2 is to obtain an absolute phase map of the entire scene using PSP method, albeit motion induced errors exist on the extracted absolute phase map; and Step 3 is to shift the continuous relative phase maps from Step 1 to generate final absolute phase maps for each isolated object by referring to the absolute phase map with error from Step 2. Experiments demonstrate the success of the proposed computational framework for measuring multiple isolated rapidly moving objects.